This is part of our series of how-to & guide about the Open Benchtable and the Open Benchtable Mini. Today we focus on mounting a motherboard on your Open Benchable. Getting ready The Open Benchtable is compatible with pretty much all the common form-factors: Mini-ITX, Micro-ATX, ATX, E-ATX and XL-ATX. The Open Benchtable Mini is […]
About Thomas Domart
This author has not written his bio yet.
But we are proud to say that Thomas Domart contributed 9 entries already.
Entries by Thomas Domart
Even if the OBT is easy to build, sometimes we just want to check how things should be worked out. Today we focus on installing fans on your Open Benchtable. Getting ready To mount your fan, you will need to detach four M3 screws, two brackets and optionnally two washers. In the middle of your […]
Even if the OBT is easy to build, sometimes we just want to check how things should be worked out. Today we focus on mounting storage on your OBT. Getting ready First, make sure your storage is supported on your OBT model. The BC1 supports 2.5″ and 3.5″ drives whereas the OBT Mini support 2.5″ […]
Even if the Open Benchtable is easy to build, sometimes we just want to check how things should work out. Today we focus on installing any sort of full sized extension card, such as a GPU or Capture Card. Getting ready First, get the PCI-E thumb screws out. If you are using the OBT, four […]
The OBT community created a lot of different adds on to the benchtable. Most of the community projects are created by enthusiasts on their own but NOCTUA decided to pitch in as well. This post will guide you to install this exclusive VRM cooling bracket! The installation of the VRM cooling bracket is ultra simple […]
Watercooling kit installation guide on the Open Benchtable. Attach your radiator, pump, reservoir and more to your OBT.
A step-by-step guide of assembling the Open Benchtable Mini
A step-by-step guide on how to assemble the Open Benchtable.
In this blog post we focus on the community project and how you can participate with your ideas.
Open Benchtable Project
We designed a benchtable tailored to a globalized PC enthusiast world. It’s sleek, light and easy to put together.
It is considered “The Golden Standard of PC test benches”.
- 3D Print – Cable Tie HolderJuly 1, 2021 - 11:08 am
- 3D Print – Cooler Master-MasterLiquid Maker 240 BracketJuly 1, 2021 - 11:01 am
- 3D Print – 120/140mm Fan and Push-Button HolderJuly 1, 2021 - 10:50 am
- 3D Print – 40mm Fan HolderJuly 1, 2021 - 7:40 am
- 3D Print – Noctua 2x 60mm fan bracketJuly 26, 2019 - 12:05 am